How to Program Your Garage Door Remote

It’s a secure feeling to have a new garage door opener installed. It guarantees you will no longer have to wonder whether your garage will function properly or not. One detail which is easy to overlook in amidst the process of choosing the proper opener and having it installed (unless bold enough to do it yourself) is how to program your opener to a remote. It’s a relatively simple but necessary process. So, how to program your garage door remote?

The Process

First, identify whether your opener has a smart-learn button (most newer models do). The button should be located near the light of the opener or in the case of the wiring of the opener. Press the Learn button and look for a blinking light. The light will blink for approximately 30 seconds, within which you should choose a button on the remote you would like to open the door and hold it. The light of the Learn button should flicker twice or you may hear two clicks, both of which indicate the remote and the opener have successfully been linked. If the light does not flicker and there are no clicks, simply try again.

Older Openers

Maybe you have an older garage door opener which does not have a Learn button. Suppose you purchase a remote corresponding to this older model but do not know how to program it. Chances are the opener will have Dip switches located behind the light cover or maybe even in a separate box depending on the model. The remote will also have these switches in the battery compartment (as many as 12 of them). To program a garage door opener and remote with dip switches, simply choose a unique pattern for the switches which can only be in the on or off positions. Make sure that the pattern of the switches matches on the remote and the opener. When they match, test the remote to see if it works properly, which it should.
Typically, you will not have to worry about dip switches due to the fact that manufacturers ceased their use between fifteen and twenty years ago to ensure each opener possesses its own unique frequency.

Programming a remote to a garage door opener is not too daunting of a task and hopefully, this tutorial is able to clear up any issues one may be having!


Archives